| Product Category | Standard Number | Name |
| Plastic Product | GB/T1033.1 | Plastics.Methods for determining density of non-celluar plastics.Part1:Immersion method,liquid pyknometer method and titration method |
GB/T1034 | Plastics.Determination of water absorption
|
GB/T1037 | Test method for water vapor transmission of plastic film and sheet-Cup method
|
GB/T1040.2 | Plastics-Determination of tensile properties-Part2:Test conditions for moulding and extrusion plastics
|
| GB/T1040.3 | Plastics-Determination of tensile properties-Part3:Test conditions for films and sheets |
GB/T1040.4 | Plastics-Determination of tensile properties-Part4:Test conditions for isotropic and orthotropic fiber-reinforced plastic composites
|
| GB/T1041 | Plastics.Determination of compressive properties |
| GB/T1043.1 | Plastics.Determination of charpy impact properties.Part 1:Non-instrumented impact test |
GB1633 | Plastics-Thermoplastic material- Determination of Vicat softening temperature (VST)
|
GB1636 | Plastics.Determination of apparent density material that can be poured from a specified funnel
|
GB1843 | Plastics-Determination of Izod impact strength
|
GB/T2406.2 | Plastics.Determination of burning behaviour by oxygen index.Part 2:Ambient-temperature test
|
GB/T2408 | Plastics.Determination of burning characteristics.Horizontal and vertical test
|
GB/T2410 | Determination of the luminous transmittance and haze of transparent plastics
|
| GB/T2411 | Plastics and ebonite.Determination of indentation hardness by means of a durometer(shore hardness) |
GB/T2567 | Plastics-Resin cast -Determination of mechanical property-general guidance
|
GB/T2913 | Test for whiteness of plastics
|
GB/T3682 | Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
|
GB/T5470 | Plastics.Determination of the brittleness temperature by impact
|
GB/T5478 | Plastics---Test method for wear of rolling
|
| GB/T7141 | Plastics.Methods of heat aging |
| GB/T8323.2 | Plastic.Smoke generation.Part 2:Determination of optical density by a single-chamber test |
GB/T9341 | Plastic.Determination of flexural properties
|
GB/T3398.2 | Plastics.Determination of hardness.Part 2:Rockwell hardness
|
| GB/T16422.2 | Plastic-methods of exposure to laboratory light sources Part2:Xenon-arc source |
GB/T15596 | Plastic--Determination of changes in color and variations in properties after exposure to daylight under glass, natural weathering or artificial light
|
GB/T6672 | Plastics film and sheeting-Determination of thickness by mechanical scanning
|
GB/T6673 | Determination of length and width of plastics film and sheeting
|
GB/T8808 | Test method for peel force of flexible laminated plastics
|
GB/T1634.1 | Plastics-Determination of temperature of deflection under load-Part 1:General test method
|
GB/T1634.2 | Plastics-Determination of temperature of deflection under load-Part 2:Plastics, ebonite and long-fiber-reinforced composites
|
GB/T1634.3 | Plastics-Determination of temperature of deflection under load-Part 3:High-strength thermosetting laminates
|
GB/T12027 | Plastics- film and sheeting- Determination of dimensional change on heating
|
GB/T8807 | Test method for specular gloss of plastics
|
GB/T15047 | Test method for stiffness properties in torsion of plastics
|
GB/T20417.2 | Plastics-Acrylonitrile-butadiene-styrene(ABS) molding and extrusion materials-Part2:Preparation of test specimens and determination of properties
|
| GB/T10006 | Plastics--Film and sheeting-- Determination of the coefficients of friction |
GB 9639.1 | Plastics film and sheeting.Determination of impact resistance by the free-falling dart method.Part1:Staircase method
|
GB/T1038 | Plastics--Film and sheeting-- Determination of gas transmission-- Differential-pressure method
|
GB/T 14216 | Plastics.Film and sheeting.Determination of wetting tension
|
| QB/T1130 | Plastics-- angle tear test |
QB/T2358 | Method for the heat-sealing strength of plastic film package
|
GB/T8809 | Test method for pendulum impact resistance of plastic films
|
GB/T16276 | Test method for blocking of plastic film
|
HG 2-163-1965 | Test method for low temperature elongate of plastic films
|
GB/T20220 | Plastics-Film and sheeting-Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
|
GB/T19466.1 | Plastics--Differential scanning calorimetry(DSC)--Part 1:General principles
|
GB/T19466.2 | Plastics--Differential scanning calorimetry(DSC)--Part 2:Determination of glass transition temperature
|
GB/T19466.3 | Plastics--Differential scanning calorimetry(DSC)--Part 3:Determination of temperatureand enthalpy of melting and crystallization
|
| GB/T19466.6 | Plastics - Differential scanning calorimetry（DSC）- Part 6: Determination of oxidation induction time（isothermal OIT）and oxidation induction temperature（dynamic OIT） |
GB/T9345.1 | Plastics - Determination of ash - Part 1: General methods
|
GB/T14522 | Artificial weathering test method for plastics,coating and rubber materials used for machinery industrial products - Fluorescent UV lamps
|
GB/T3399 | Test method for thermal conductivity of plastics by means of the guarded hot plate
|
SN/T 2078 | Determination of six kinds of phthalates in PVC toys and childcare articles --GC/MS method
|
SN/T 2249 | Determination of phthalatcs in plastics and articles-Gas chromatography-mass spectrometry(GC-MS)method
|
SN/T 2379 | Determination of bisphenol A in polycarbonate resin and its products—Gas chromatography-mass spectrography
|
SN/T 2407 | Determination of phenol and bisphenol A in toys
|
GB/T4615 | Poly(vinyl chloride)--Determination of residual vinyl chloride monomer--Gas-chromatographic method
|
ISO 179-1:2000 | Plastics – Determination of Charpy impact properties – Part1: Non-instrumented impact test
|
ISO 180:2000 | Plastics – Determination of Izod impact strength
|
ISO 62:1999 | Plastics – Determination of water absorption
|
| ISO 75-1-2013 | Plastics - Determination of temperature of deflection under load - Part 1: General test method |
| ISO 75-2:2004 | Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite |
| ISO 1133-2 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture |
ISO 1133-2 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
|
ISO 527-1:2012 | Plastics -- Determination of tensile properties -- Part 1: General principles
|
ISO 527-2:2012 | Plastics -- Determination of tensile properties -- Part 2: Test conditions for moulding and extrusion plastics
|
| ISO 306-2013 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) |
ISO 11357-6:2002 | Plastics – Differential scanning calorimetry (DSC) – Part 6: Determination of oxidation induction time
|
ISO 2039-1:2003 | Plastics – Determination of hardness – Part 1: Ball indentation method
|
ASTM D 256 – 10 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
|
ASTM D 570 – 98 | Standard test methods for water absorption of plastics
|
ASTM D638-2010 | Standard Test Method for Tensile Properties of Plastics
|
ASTM D648-07 | Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
|
ASTM D 785 –2008 | Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
|
ASTM D790-2010 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
|
| ASTM D792-2013 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
ASTM D 882 –2012 | Standard Test Method for Tensile Properties of Thin Plastic Sheeting
|
ASTM D1238-2010 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
|
ASTM D 1525 –2009 | Standard Test Method for Vicat Softening Temperature of Plastics
|
| ASTM G154-2012a | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| ASTM D3755-2014 | Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress |
| ASTM G155-2013 | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials ASTM G155-2013 |
ASTM D257-2014 | Standard Test Methods for DC Resistance or Conductance of Insulating Materials
|
ASTM D695-2010 | Standard Test Method for Compressive Properties of Rigid Plastics
|
ASTM G26-1996 | Standard Practice for Operating Light-Exposure Apparatus (Xenon-Arc Type) with and without Water for Exposure of Nonmetallic Materials
|
ANSI/UL94 – 2013 | Standard for test for flammability of plastic material for parts in devices and appliances
|
ASTM D1004-2009 | Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
|
ASTM D1204-2008 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
|
ASTM D1709-2009 | Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
|
| GB/T27843 | Chemicals.Determination of the low molecular weight content of a polymer using Gel permeation chromatography (GPC) |
| SN/T3003-2011/ISO11358：1997 | plastics-thermogravimetry (TG) of polymers-general principle |
GB/T8946 | Plastic woven sack
|
QB/T3805 | Polyvinyl chloride wall coverings
|
| QB/T 4034 | Wallpaper
|
| QB/T1870- | Plastic chopping board
|
| GB19342 | Tooth brush
|
| GB/T5737 | Plastic container for food
|
| GB/T5738 | Plastic crates for beverage bottled
|
| GB/T 20394 | Gymnastic artificial turf
|
| BS ISO 5834-2 | Implants for surgery - Ultra-high-molecular-weight polyethylene - Moulded forms
|
| GB/T4085 | Semi rigid polyvinyl chloride floor tiles
|
| ASTM D1000 | Standard test method for press–sensitive adhesive coated tapes used for electrical and electronic application
|
| ISO 12097-2 | Road vehicles – Airbag components – Part 2:Testing of air bag module
|
